SITE INFORMATION

Capture Type: Non-dense, so 8-10ft apart is ok. Be careful not to jump too far with a repetitive space like a warehouse

Camera: Matterport Pro2

Scope of work: Capture interior of the entire warehouse, office areas, bathrooms, as well as exterior 360’s

SCOPE OF WORK

• You will be required to 3D Scan the entire interior of each location, as well as perform 360 scans outside every exit & entrance for each site.

• Capture loading dock, offices, restrooms, the exterior of exits, and entrances.

• Complete the VS Checklist for this project (below).

• Scans should be placed 8-10ft. apart, no dense scans are needed.

• 50% progress check, send photo of iPad point clouds of space.

• Before leaving site send final iPad point clouds of space.

• Scans must be submitted to our Matterport account and finalized within 48 hours – this includes any post-scan work necessary (marking, trimming, inserting 360 Scans to the map, etc.)

FAQ’S

• Average 100 scans per 10,000 sqft. is minimum.

• Average 80+/- scans per hour in a commercial warehouse.

Contacts in case of issues or concerns

1) Alyssa Tirrito, +1 (646) 920-6928, Alyssa@VirtualSpace.Global

2) Basm Mohsen, +1 (212) 991-8679, Basm@VirtualSpace.Global